Air Rifle and Pistol Accessories South Yorkshire

Silencers

Weihrauch HW100 Silencer £49.95

This new silencer from Weihrauch designed to fit the new HW100S.
It has a half inch UNF fitting, which means it will fit the likes of the Logun Mk1 & Mk2, Axsor and S16Mk1 Logun Domin8or, Gladi8or unshrouded versions AGS LiteW8, Webley Stingray, Longbow & FX2000, Daystate HarrierX, X2 & Mk3, BSA Hornet, Brocock Independant and many more…
Length 19.7cm
Weight 110grams

Daystate MK6 Silencer £59.99

The new Airstream MK6 is specially made to fit all current Daystate rifles and screws in place in the middle of the unit.

A separate adaptor is available should the rifle not already have one fitted. To make them as quiet as possible the new unit is calibre and model specific.

The new Daystste silencer has an overall length of 7″ and only 3.5” extending forward.

The Daystate Reflex Silencer is not only lighter than it’s predecessors at 99 grams but is quieter tested at just 61.3 db.

Milbro Huggett Belita Silencer from £71.95

Manufactured in the UK by Huggett. Constructed from aircraft grade aluminium with a brushed graphite finish The internals are stainless steel mesh baffles with a ballistic fibre coating This model has a ½” UNF screw fitting Weight: 98g – Length: 120mm

The Milbro Huggett is distributed exclusively by Milbro Sports, It comes in various versions and fittings:
1. The standard female ½ inch UNF (tapered);
2. A ½ inch UNF male fitting for rifles such as the Air Arms S510 (tapered);
3. A ½ inch female fitting for BSA rifles such as the Super 10 (square end);
4. Special slip-on versions for Air Arms 410s and Theoben rifles;
5. Full shroud moderators for the Theoben MFR (early models); the Daystate Air Wolf & Air Ranger;
the Daystate Mark 5; the FX Royale 400 and FX Royale 500.

Q-Tec Silencers Air Arms £68.00

Presenting the new Air Arms QTec Silencer

When the full force of Air Arms’ technology is aimed at producing a silencer, the result is always going to be impressive. The QTec has exceeded even our high expectations and we believe it will exceed yours too. We make the world’s finest ariguns – and now we’ve produced the world’s best silencer. It’s time to bring QTec performance to your shooting.

~ Designed and produced using full Air Arms technology resources
~ Calibre specific for maximum sound reduction available in .177, .22 and .25
~ Fluid dynamics and simulation systems used to ensure superior performance
~ Proven to be 10.92% quieter than the market leading moderator
~ Air Arms signature “swirl” end cap
~ Low reflection hard wearing black finish
~ Lightweight only 800g

1/2″ UNF Female .177/.22/.25, 1/2″ UNF Male .177/.22/.25, S200 .177/.22, S400/S410 .177/.22, TDR .177/.22

BSA VC Silencer £45.99

The only airgun silencer you will ever need. This latest-generation silencer actually allows the shooter to match its internal specification to suit the calibre of the rifle. A supplied Allen key permits the removal of the end of the silencer, so that different size restrictors can be fitted, so increasing or decreasing the muzzle aperture according to calibre to maximise the reduction in noise-energy as the pellet leaves the moderator. This ‘variable choke’ facility turns a silencer into one of the most useful hunting accessories of all time.

The BSA VC Silencer is supplied with 2- interchangeable muzzle restrictors that should be matched to the calibre of the airgun it is to be fitted to. The black restrictor must be fitted to .177 (4.5mm) calibre airguns. The white restrictor must be fitted to .22 (5.5mm) calibre airguns. The silencer is supplied with the white restrictor pre-fitted. Please note both restrictors have oversize holes to allow for barrels that have non – concentric bores. If the silencer is to be used on .25 (6.35mm) calibre airguns, no restrictors are fitted. Access to the restrictor is gained by removing the restrictor screw from the Silencer end cap using the 8mm Allen key provided.

NOTE: Fitting the silencer to your airgun may change the pellet point of impact – shoot a test group and re-zero the sights if necessary.

BSA Muzzle Break £15.00

This stylish, discreet accessory has two main functions, both of which it carries out extremely well. First, it provides a neat finish to the rifle’s barrel and protects the precision crowning of the muzzle and the threads from knocks and similar damage. Secondly, the multi-port section of the Muzzle Brake allows air to vent to atmosphere while the pellet exits in reduced turbulence.

Airgun Cylinders

4-Litre Airgun Cylinder £174.92

At 4 Litres, this cylinder is a small and compact unit that can be easily carried into the field like our 3-Litre, but is much more stable when standing up – due to its lower centre of gravity and wider footprint.
Filling to 300 Bar, complete with a boot and various adaption options; this cylinder is a great deal for people who need the mobility and storage benefits of a compact cylinder.

7-Litre Airgun Cylinder £194.59

Our 7-Litre 300Bar airgun charging cylinder is perfect for those situations where portability & capacity need to be maximised. Over twice the capacity of our 3-Litre but still easily transported, this cylinder comes complete with a boot and is available in 3 different valve options to suit nearly any gun type. This cylinder has a 5-year test schedule making upkeep more affordable.

12-Litre Airgun Cylinder £239.95

With 12-Litres of air at 300Bar, this airgun charging cylinder is a perfect storage cylinder to save you visiting a compressor constantly. Complete with a boot and available in 3 different valve options to suit nearly any gun type, the 5-year test schedule means that this cylinder will earn its money in saved refill trips alone!

Airgun Filling Accessories

QC03 Quick Coupler Plug £6.50

Add more fill probes to your starter kit, BEST Fittings QC02 Coupler or compatible Foster type coupling. Quality Stainless Steel. Our QC03 fittings will also connect directly to the snap coupler supplied with many popular rifles such as Daystate, Crosman, Benjamin etc. So if you already have one of those, then simply fit one of our quick coupler plugs to each of your other fill probes to enjoy swift interchange of fill connectors.

Male to Male Adaptor £2.50

1/8″ BSP Male/Male Adaptor.

Use for connecting two female 1/8″BSP fittings, or as gender changer.

M6 Bonded Seal Washes – 5pk £2.50

M6 Bonded Seal Washers 5 Pk

For sealing M6 parallel fittings.

Airgun Filling Probes

Weihrauch HW100 Quick Fill Probe £15.00

Standard 1/8″BSP male thread for direct fitting to a flexible fill line or our quick coupler system. Made from brass to combat the corrosion found inside some of the earlier steel units originally supplied with the Weihrauch HW100 Quick Fill cylinder. Complete with spare ‘O’ rings and silicone grease kit.

Air Arms New Style Fill Coupling. T-Slot Type £15.00

New Style Air Arms Female Fill Adaptor. Suits the Air Arms S400/410/200 and the new S510. This is the hose end fitting with ‘T’ bar slot to locate on the new style fill valve with the ‘T’ bar retainer on the end. Also fits early ‘New Style’ valves without the ‘T’ bar on the end of the fill valve. (Quite rare)

BSA Fill Probe Kit £15.00

BSA Fill Probe Kit Fits BSA R10 / T10, Ultra, Scorpion, Sportsman and all other BSA Probe Fill Range. Standard 1/8″BSP male thread for direct fitting to a flexible fill line. Complete with spare ‘O’ rings and silicone lube.